CSDSC-C50100L1

The CSDSC-C50100L1 is a current switch device manufactured by Johnson Controls. Here are the key details about this product:

## Specifications

– Type: Clamp-on current switch
– Maximum Current: 100 A
– Minimum Trip Setpoint Value: 0.50 A
– Status Output: Switch normally open
– Switch Load Capacity: 1.0 A at 30 VAC/VDC
– Switch Setpoint: Adjustable

## Features

– Aperture (Sensing Hole) Size: 0.75 x 0.75 inches (19.1 x 19.1 mm)
– Switch LED Indication: Yes
– Current Switching Mode: Over/Under
– Sensor Supply Voltage: Induced from power conductor cable
– Status Output Wire Size: 14 to 24 AWG (1.6 to 0.5 mm)

## Technical Details

– Screw Torque: 3.5 to 4.4 in·lb (0.4 to 0.5 N·m)
– Isolation Voltage: 600 VAC rms (UL), 300 VAC rms (CE)
– Frequency Range: 50/60 Hz
– Temperature Range: 5 to 140°F (-15 to 60°C)
– Humidity Range: 0 to 95% noncondensing
– Dimensions: 2.5 x 0.57 x 2.23 inches (63.5 x 14.5 x 56.6 mm)

## Additional Features

– Command Relay Device Actuation Coil: 20 to 30 VAC/VDC, 12 to 20 mA or 10 to 14 VAC/VDC, 25 to 35 mA
– Relay Contact Rating: N.O. 10A at 125 VAC or N.C. 10A at 125 VAC
– Relay LED Indication: Yes

## Compliance

– United States: UL Listed, File E493157, CCN NMTR, Under UL 508, Industrial Control Equipment
– Canada: UL Listed, File E493157, CCN NMTR7, Under CAN/CSA C22.2 No. 14-M91
– Europe: CE Mark compliant with EMC Directive and Low Voltage Directive

The CSDSC-C50100L1 is part of the CSDSC series of current switch devices, which use a single-turn dial to select motor full load amps. This feature eliminates the need for live calibration and significantly reduces installation time[1][3].